©
Copyright Qvis Labs. All software and documentation rights reserved.
Manual updated February 2016
56
System Events
Within this menu section you can set
whether you want the system to log an
event or send a notification email if a
hard disk drive has failed or has been
removed, or if an IP camera has gone
offline. Tick the boxes for the desired
setup and select ‘Accept Changes’ to
save setup.
Motion Alarm
Specify which cameras you want to
have the motion detection function
enabled, and at what motion
sensitivity level. When alarm is
triggered and camera’s video panel
enlarges to full screen on the monitor,
the tile will stay full until either the
user dismisses it or another alarm
occurs.
Relay Settings
If you have activated the relay(s) then
you can set the duration of the relay
being opened when an alarm has
been triggered. Input a length of time
between 10-300 seconds, and then
select ‘Accept Changes’ to implement
the inputted length of time.
Audible Alarm
If you have selected
‘Audible Alarm’
on the
‘Sensor Events’
(see
page 54
)
options then you can set the duration
of the alarm being sounded when
an alarm has been triggered. Input
a length of time between 10-900
seconds, and then select ‘Accept
Changes’ to implement the inputted
length of time.
Alarm
(continued)
Settings
