©
Copyright Qvis Labs. All software and documentation rights reserved.
Manual updated February 2016
34
Settings
The system
‘Settings’
is where you can modify the NVR & camera configuration parameters,
to set them to run your CCTV security system.
You can find the ‘
Settings
’ (and
Schedule
setup feature)
options by clicking the right mouse button anywhere
within the tiled live monitoring screen. Select the
‘
Settings Login
’ on the options list (highlighted on the
right by the red box).
You will then see a login screen appear
Type in your Username and Password to
access the ‘
Video Control Panel
’.
Type in your login details and it will open up
the ‘
Video Control Panel
’ (VCP) window.
CORTEX NVR RANGE - VCP
The VCP’s layout, shown below, is only used with the
Terminator G620 NVR range
. The
image also shows the active alarm input sensors if the particular device has alarm in/out
relays as part of its specification (highlighted by the red box).
When you click on ‘
Settings
’ the
Cortex NVR Settings
has 8 menus:-
1.
IP Cameras
(Page 35)
2.
NVR
(Page 41)
3.
Network
(Page 45)
4.
User
(Page 51)
5.
Alarm
(Page 54)
6.
Info
(Page 57)
7.
Update
(Page 59)
8.
Support
(Page 60)
