©
Copyright Qvis Labs. All software and documentation rights reserved.
Manual updated February 2016
40
To set privacy masked areas, please firstly select the camera from the list on the left
hand side.
On the grid placed over the camera’s view, select the sectors you would like blanked
out. You can either click on individual sectors on the grid or hold down the left mouse
button and drag out an area you would like covered.
Shown on the right side below, are two areas selected on the privacy masking grid, and
the image on the left side shows how the areas are blanked off.
There are two buttons found underneath the camera view grid. The first one being
‘
Clear All
’, which allows you to clear all of your sector selections, and the second is
‘
Set All
’ where you can select all the sectors on the grid all at once.
Once you have completed your privacy masking setup click the ‘
Accept Changes
’
button at the bottom of the window.
IP Cameras
(continued)
1
2
Note:
Only our professional range of IP cameras will work with this feature.
3
4
Settings
