©
Copyright Qvis Labs. All software and documentation rights reserved.
Manual updated February 2016
46
Network
(continued)
Settings
DNS
This allows you to change the DNS (Domain Name System) setting.
The DNS setting is automatically detected when connected to a network. If it needs to be
changed then you can enter a new DNS setting into the input bar.
Click
‘Accept Changes’
to confirm or
‘Reject Changes’
to cancel.
WAN Access - Port Forwarding:
This allows you to change the WAN Access settings.
The NVR uses the above ports to listen for incoming client connections. The protocol type
for each port is shown to its right.
If the NVR is on the inside of a firewall, the firewall may need to be configured to pass through
traffic on these ports.
Note:
See your firewall user guide/instructions to find out how to do this.
