Qvis I-ZEUSL-4 User Manual Download Page 10

Page: 10 / 160

1 FEATURES AND SPECIFICATIONS

1.1 Overview

This series product is an excellent digital monitor product designed for security field. It adopts

embedded Linux OS to maintain reliable operation. Popular H.264 compression algorithm and

G.711 audio compression technology gives you high quality and a low a bandwidth bit stream.

Unique frame by frame play function is suitable for detail analysis. It has various functions such as

record, playback, monitor simultaneously and can guarantee audio video synchronisation. This

series product uses advanced technology to provide a strong network data transmission function.

This series device adopts embedded design to achieve high security and reliability. It can work at

the local end, and at the same time, when connecting it to the professional surveillance software

(PSS), it can connect to security network so that you can you are able to use the remote monitor

function.

1.2 Features

This series product has the following features:



Real-time monitor:

It has analog output port, VGA port and HDMI port. You can use monitor or

use a display to be able to operate the surveillance function. System supports TV/VGA/HDMI

output at the same time.



Storage function:

Special data format to guarantee data security and can avoid vicious data

modification.



Compression format:

Support multiple-channel audio and video. An independent hardware

decodes the audio and video signal from each channel to maintain video and audio

synchronization.



Backup function:

Support backup operation via USB port (such as flash disk, portable HDD,

burner).Client-end user can download the file to local HDD to backup via network.



Record playback function:

Support each channel real-time record independently, and at the

same time it can support search, forward play, network monitor, record search, download and

etc.Support various playback modes: slow play, fast play, backward play and frame by frame

play.Support time title overlay so that you can view event accurate occurred time Support

specified zone enlargement.



Network operation:

Support network remote real-time monitor, remote record search and

remote PTZ control.



Alarm activation function:

Several relay alarm outputs to realize alarm activation and on-site

light control.

The alarm input port and output has the protection circuit to guarantee device

safety.

Summary of Contents for I-ZEUSL-4

































































































































































Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands

Qvis I-ZEUSL-4, User Manual

Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands