Qvis I-ZEUSL-4 User Manual Download Page 42

Page: 42 / 160

>Setting->Schedule) and select schedule record in manual record interface (Main Menu -

>Advance->Manual Record).



Latch:

Here is for you to set proper delay duration. Value ranges from 10 to 300 seconds.

System automatically delays specified seconds in turning off alarm and activated output

after external alarm cancelled.



Tour:

Here you can enable tour function when alarm occurs. System supports one -

window tour. Please go to chapter 5.3.9 Display for tour interval setup.



Buzzer:

Highlight the icon to enable this function. The buzzer beeps when alarm occurs.

For snapshot operation, please refer to chapter 4.4.2.

Please highlight icon

to select the corresponding function. After setting all the setups ple ase

click save button, system goes back to the previous menu.

Figure 3-28

Figure 3-29

Summary of Contents for I-ZEUSL-4

































































































































































Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands

Qvis I-ZEUSL-4, User Manual

Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands