Qvis I-ZEUSL-4 User Manual Download Page 145

Page: 145 / 160

136

Please refer to the following sheet for detailed information:

Parameter Function

Channel

Select speed dome connected channel.

Protocol

Select the corresponding dome protocol such as PELCOD..

Address

Set corresponding dome address. Default value is 1.

Please note

your setup here shall comply with your dome address; otherwise
you can not control the speed dome.

Baud
Rate

Select the dome baud rate. Default setup is 9600.

Data Bit

Default setup is 8. Please set according to the speed dome dial switch
setup.

Stop bit

Default setup is 1. Please set according to the speed dome dial switch
setup.

Parity

Default setup is none. Please set according to the speed dome dial
switch setup.

6.8.6

Advanced

6.8.6.1

Text Overlay

The card overlay function is for financial areas. It includes Sniffer, information analysis and title

overlay function. The Sniffer mode includes COM and network.



Text Overlay: COM Type

The COM interface is shown as below. See Figure 6-83.



Protocol:

Please select from the dropdown list.



Setting:

Click COM setting button, the interface is shown as in RS232 interface. Please refer to

Chapter 6.8.5.8 RS232.



Overlay channel:

Please select the channel you want to overlay the card number.



Overlay mode:

There are two options: preview and encode. Preview means overlay the card

number in the local monitor video. Encode means overlay the card number in the record file.



Overlay Position:

Here you can select the proper overlay position from the dropdown list.

Summary of Contents for I-ZEUSL-4

































































































































































Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands

Qvis I-ZEUSL-4, User Manual

Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands