© Copyright Qvis ®. All documentation rights reserved.
36
Click backup button, system begins burning. At the same time, the backup button becomes stop
button. You can view the remaining time and process bar at the left bottom. See Figure 4-34.
Figure 3-34
The file name format usually is: SN_CH+channel time Y+M+D+H+M+S. In the file
name, the YDM format is the same as you set in general interface. (Main Menu ->Setting -
>General).File extension name is .dav.
Tips:
During backup process, you can click ESC to exit current interface for other operation. The
system will not terminate backup process.
Note:
When you click stop button during the burning process, the stop function becomes activated
immediately. For example, if there are ten files, when you click stop system just backup five files,
system only save the previous 5 files in the device (But you can view ten file names).
3.9 PTZ Control and Color Setup
Note:
All the operations here are based on PELCOD protocol. For other protocols, there might
be a little difference.
3.9.1 Cable Connection
Please follow the procedures below to go on cable connection:
1. Connect the dome RS485 port to DVR 485 port.
2. Connect dome video output cable to DVR video input port.
3. Connect power adapter to the dome.
