Qvis I-ZEUSL-4 User Manual Download Page 131

Page: 131 / 160

122

Please refer to the following sheet for detailed information:

Parameter

Function

Channel

Here you can view channel number.
The number displayed here is the max channel amount of your
device.

Status

There are three statuses: schedule, manual and stop.

Schedule

System enables auto record function as you set in record schedule
setup (general, motion detect and alarm).

Manual

This has the highest priority. Enable corresponding channel to
record no matter what period applied in the record setup.

Stop

Stop current channel record no matter what period applied in the
record setup.

Start all/
stop all

Check the corresponding All button, you can enable or disable all
channels record.

6.8.5

System

6.8.5.1

General



General

The general interface includes

General, date/time

and

holiday setup.

The general interface is shown as in Figure 6-64.

Figure 6-64

Summary of Contents for I-ZEUSL-4

































































































































































Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands

Qvis I-ZEUSL-4, User Manual

Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands