Qvis I-ZEUSL-4 User Manual Download Page 76

Page: 76 / 160



COM Type

The COM interface is shown as below. See Figure 4-35.



Protocol: Please select from the dropdown list.



Setting: Click COM setting button, the interface is shown as in RS232 interface. Please refer

to Chapter 5.3.4 RS232.



Overlay channel: Please select the channel you want to overlay the card number.



Overlay mode: There are two options: preview and encode. Preview means overlay the card

number in the local monitor video. Encode means overlay the card number in the record file.



Overlay Position: Here you can select the proper overlay position from the dropdown list.

Figure 4-35



Network Type

The network type interface is shown as below. See Figure 4-36.

Here we take the ATM/POS protocol to continue.

There are two types: with or without the protocol according to client’s requirements.

With the protocol:

For ATM/POS with the protocol, you just need to set the source IP, destination IP (sometimes you

need to input corresponding port number).

Summary of Contents for I-ZEUSL-4

































































































































































Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands

Qvis I-ZEUSL-4, User Manual

Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands