© Copyright Qvis ®. All documentation rights reserved.
42
Please go to
49H
Figure 4-35, use direction arrows to select camera left limit.
Then please go to Figure 4-43
X
and click left limit button. Repeat the above procedures to set right
limit.
Figure 3-45
3.10.8 Activate Auto Scan
In Figure 4-41
, click “Auto Scan” button, the system begins auto scan. Correspondingly, the auto
scan button becomes Stop button. Click stop button to terminate scan operation.
3.11 Flip
In Figure 4-41, click page switch button, you will see the interface as shown below. See Figure 4-46.
Here you can set auxiliary function. The aux value has relation ship with the Aux button of the
decoder.
Click page switch button again, system goes back to Figure 4-37.
Figure 3-46
