Qvis I-ZEUSL-4 User Manual Download Page 69

Page: 69 / 160

4.5.1 HDD Management

Here is for you to view and implement hard disk management. See Figure 4-25.

You can see current HDD type, status, capacity and record time. The operation includes the

format/restore from error and change the HDD property. When HDD is working properly, system is

shown as O. When HDD error occurred, system is shown as X.

You can select HDD mode from the dropdown list such as read-only or you can erase all data in the

HDD.

Please note system needs to reboot to get all the modification activated.

Figure 4-25

Click alarm set button, the interface is shown as below. See Figure 4-26. (This interface is just like

the abnormity setup). Please refer to chapter 5.5.2 for detailed information.

Please highlight icon

to select the corresponding function.

Figure 4-26

Summary of Contents for I-ZEUSL-4

































































































































































Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands

Qvis I-ZEUSL-4, User Manual

Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands