Qvis I-ZEUSL-4 User Manual Download Page 20

Page: 20 / 160

2 Installation and Connections

Note: All the installation and operations here should conform to your local
electric safety rules.

2.1 Check Unpacked DVR

When you receive the DVR from the forwarding agent, please check whether there is any visible

damage. The protective materials used for the package of the DVR can protect most accidental

clashes during transportation. Then you can open the box to check the accessories.

Please check the items in accordance with the list. Finally you can remove the protective film of the

DVR.

2.2 Connecting Power Supply

Please check if the input voltage and device power requirements match or not.

We recommend you use a UPS system to guarantee steady operation and to lengthen DVR and

other peripheral equipment

’s such as cameras operational life span (please visit

www.adata.co.uk

for info on our UPS ranges).

2.3 Connecting Video Input and Output Devices

2.3.1 Connecting Video Input

The video input interface is BNC. The input video format includes: PAL/NTSC

BNC

（

1.0V

P- P

，

75Ω.

）

.The video signal should comply with your national standards.

The input video signal should have a high SNR, low distortion; low interference, natural color and

suitable lightness.

GUARANTEE THE STABILITY AND RELIABILITY OF THE CAMERA SIGNAL

The camera should be installed in a cool, dry place away from direct sunlight, inflammable and

explosive substances.

The camera and the DVR should have the same signal grounding to ensure the normal operation of

both devices.

GUARANTEE STABILITY AND RELIABILITY OF THE TRANSMISSION LINE

BTTTB

Please use high quality, sound shielded BNC. Please select suitable BNC model according to the

transmission distance.

Summary of Contents for I-ZEUSL-4

































































































































































Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands

Qvis I-ZEUSL-4, User Manual

Search results

Summary of Contents for I-ZEUSL-4

Reviews:

Related manuals for I-ZEUSL-4

Brands by name

Popular brands