© Copyright Qvis ®. All documentation rights reserved.
83
Figure 6-5
Section 3: Start dialogue button.
You can click this button to enable audio talk. Click
【
▼
】
to select bidirectional talk mode.
There are four options: DEFAULT
，
G711a
，
G711u and PCM. After you enable the bidirectional talk,
the Start talk button becomes End Talk button and it becomes yellow. See Figure 6-6.
Note:
the audio input port from the device to the client-end is using the first channel audio input port.
During the bidirectional talk process, system will not encode the audio data from the 1-channel.
Figure 6-6
Section 4: Instant record button. Click it, the button becomes yellow and system begins manual
record. See Figure 6-7. Click it again, system restores previous record mode..
Figure 6-7
