Quato iColor Display 3.7, User Manual

Page: 19 / 73

19
the desk. The best distance from your eyes to the
screen is up to you, although most people prefer 45
to 70 cm.
Position the display by tilting it up or down to mini-
mize glare and reflections from overhead lights and
nearby windows.
Installation of the Hood
Assemble the three parts of the hood and place the
hood on the velcro strips of the screen. Please make
sure that the hood and the velcro on the screen are
properly aligned. You can bend the hood slightly to
make the mounting procedure a bit easier.
Mounting of the Sensor
To mount the optional measurement sensor (Silver
Haze Pro), use the velcro sling that is located on the
inner top of the hood. Make a sling and guide the
USB-cable through the sling. Then, fasten the sling
and mount it on the velcro in the inner top of the
hood as shown on the right side.
If you use other devices like the EyeOne Display or
the Datacolor Spyder 2/3, the velcro sling can also
be used.
If you want to use the EyeOne Pro spectrophotome-
ter, please also use the velcro sling but do not use
it as a sling. Simply guide the counter weight strip
of the EyeOne Pro between the two velcro parts and
mount the flattened sling on the velcro as shown on
the right side.
Always remove your sensor after calibration as the
units warm up significantly and this can reduce the
long and short term precision.