Quato iColor Display 3.7, User Manual

Page: 15 / 73

15
Installation for Windows Vista 32/64
If Windows prompts with a question about automa-
tic driver search in the internet, just ignore this and
follow the steps below.
Now select that you would like to install the software
from another source.
Search the directory (see above) of the iColor Display
application and select the „driver“ folder.
Windows possibly reports about a missing signature
of the driver. Just ignore this message.
Now Windows will tell you that the driver has been
installed correctly and that your device is now ready
to use.
You can check the status of the device by using the
hardware manager. The display´s interface is called
„..Cp210x....“.
Please perform the installation of the measurement
device drivers in the same way as described above.
Installation for Windows 7 32/64
If Windows prompts with a question about automa-
tic driver search in the internet, just ignore this and
follow the steps below.
Now select that you would like to install the software
from another source.
Search the directory (see above) of the iColor Display
application, and select the „driver“ folder.
Windows possibly reports about a missing signature
of the driver. Just ignore this message.
Now Windows will tell you that the driver has been
installed correctly, and that your device is now ready
to use.
You can check the status of the device by using the
hardware manager. The display´s interface is called
„..Cp210x....“.
Please perform the installation of the measurement
device drivers in the same way as described above.