Quato iColor Display 3.7, User Manual

Page: 31 / 73

31
The OSD for the Intelli Proof 242 excellence und
240 excellence LED offers the following functions:
- Input Source Settings
- Exit
- Digital DVI-I
- Analog DVI-I
- Digital DVI-D
- Display Port
- Video
- Exit
- Auto Setup (analogue)
- Brightness (luminance)
- Contrast
- Saturation
- Hue
- Display
- Color Mode Setting
- Exit
- H.W. (hardware) Calibration
- RGB (RGB adjustment)
- Color Gamut
- RBGYCM (6 axis Color adjustment)
- Management Setting
- Exit
- Scaling
- OSD Position
- Recall (Reset)
- UART Switch (for service only)
- Language
Upon the first use, the display will show an “Out
of Sync” warning because the unit does not search
for a signal automatically. Therefore, please press
the button, on the right and select an input.
Auto Setup performs an automatic adjustment
when a VGA signal is used.
Brightness controls the backlight brightness.
The Color Mode is used to switch between the
two calibration modes, to simulate smaller gamut
(max. gamut setting is neutral).
Management is used to select languages, to
change the OSD position, the scaling and to reset
the whole unit.