Quato iColor Display 3.7, User Manual, Page: 29 / 73

29
The OSD for the Intelli Proof 230/240/230 excel-
lence, 220/240/242 le offers the following func-
tions:
- Input (only LE units)
- Auto Setup (analogue)
- Brightness (luminance)
- Contrast (analogue)
- Image (analogue)
- Color Setup
- Frequency/Phase (analogue)
- Management
To select the connection, choose Input.
Auto-Setup performs an automatic adjustment when
a VGA signal is used.
Brightness controls the backlight brightness.
Contrast is only available if the display is used in
VGA mode.
Image adjusts position and size of the image in ana-
logue mode.
The Color Setup is used to switch between the two
calibration modes:
- Hardware Calibration
- RGB (RGB adjustment with Gamma 2.2)
For a manual calibration, just select RGB and adjust
the RGB values accordingly.
Frequency and phase can be used to finetune an
image if the Auto Setup results in a suboptimum
image performance.
Management is used to select languages, to change
the OSD position, to reset the whole unit and to
change the input (non-LE units).