Quato iColor Display 3.7, User Manual

Page: 14 / 73

14
Software installation for Intelli Proof Displays for
Windows XP 32 / Vista 32/64 / Windows 7 32/64
Insert the Quato-CD, start the Installer and select
your language.
The Installer copies the software and drivers onto
your harddisk.
C:\Programs\Quato\iColorDisplay
It also links the application to your start menu and
places a link on the desktop on request.
You can now connect the Quato display´s USB-port
and the measurement device to your computer. Win-
dows will note that new hardware was found. Please
follow the steps for your Windows version below.
Notice:
Please make sure that you have administra-
tor rights for both, installation and iColor Display (to
successfully save profiles).
Installation for Windows XP 32
If Windows prompts with a question about automa-
tic driver search in the internet, just ignore this and
follow the steps below.
Now select that you would like to install the software
from another source.
Search the directory (see above) of the iColor Display
application, and select the „driver“ folder.
Windows possibly reports about a missing signature
of the driver. Just ignore this message.
Now Windows will tell you that the driver has been
installed correctly, and that your device is now ready
to use.
You can check the status of the device by using the
hardware manager. The display´s interface is called
„..Cp210x....“.
Please perform the installation of the measurement
device drivers in the same way as described above.
Notice: Windows XP 64 bit is not supported by the
driver or iColor Display application.
Software Installation for Calibra-
tion Software and Measurement
Devices