Service Menu
4-151
September 2007
Self Test Dialog
Path:
Main Menu
Service
Diags
Self Test
Use the Self Test Dialog to run a predetermined sequence of
diagnostics and exercisers. See Figure 4-234.
Figure 4-234
Self \Test Dialog
Parameters
Description
Cycles to Run
Indicates the desired cycle
count (001–999)
Accept
Y
to accept changes
N
to reject changes
If
Y
is selected, the Response Dialog appears.
See
Figure 4-235. Otherwise, the changed parameters
continue to display but no action is taken.
Figure 4-235
Response Dialog
Parameters
Description
Cycle
The number of completed test
cycles of the requested cycles
Status
Shows the status of the
indicated cycle (Running,
Completed, Error, Canceled)
Cancel
Y
to cancel the test
N
to continue running the test
If
Y
is selected for the Cancel parameter value, the test is
canceled. Otherwise, the test continues.
The self test runs
a sequence of diags.
Cycles to run:009<
Accept: N
DIAGS SELF TEST
Cycle :006 of 009
Status:Running
Cancel: N<
Note
If the operation
stops, the
Cancel
parameter no
longer displays.
Summary of Contents for Scalar 10K
