Quantum Scalar 10K User Manual Download Page 112

Page: 112 / 324

4-34

Menus and Commands

6-00058-05 Rev A

Parameters

Description

WWN

Displays the current drive world
wide name.

Each drive has a unique WWN
based on the library ID number
and the drive position, not the
manufacturer assigned drive
WWN.

If you replace a fibre channel
drive in the same position of the
same library, the WWN remains
the same.

Speed

Data rate (Auto, 1 GB, 2 GB)

Auto

: The library auto

negotiates the data transfer rate.

1 GB

: 1 Gigabit/sec

2 GB

: 2 Gigabit/sec

4 GB

: 4 Gigabit/sec

If the fibre channel drive has
dual ports, a second Speed field
appears.

Topology

Method of connecting to fibre
(Auto, Loop, Nport). If the fibre
channel drive has dual ports, a
second Topology field appears.

Summary of Contents for Scalar 10K





































































































































































































































































































































Search results

Summary of Contents for Scalar 10K

Reviews:

Related manuals for Scalar 10K

Brands by name

Popular brands

Quantum Scalar 10K, User Manual

Search results

Summary of Contents for Scalar 10K

Reviews:

Related manuals for Scalar 10K

Brands by name

Popular brands