Quantum Scalar 10K User Manual Download Page 67

Page: 67 / 324

Using the Remote Management Unit

3-11

September 2007

•

Allows RMU configuration changes such as network,
users, and date/time.

•

Provides online access to documentation.

The following screen is the opening screen of the RMU.

Supported Browsers

The RMU supports the following browsers:

•

Microsoft Internet Explorer version 5.0 and above

•

Netscape Navigator version 4.01 for Unix and 4.7x for
other environments

RMU Prerequisites

The RMU requires a network address that consists of an
Internet Protocol (IP) address, subnet mask, and gateway IP
Address.

Once you have this information, input it to the RMU by means
of the operator panel. For more information, see the
instructions that follow.

Summary of Contents for Scalar 10K





































































































































































































































































































































Search results

Summary of Contents for Scalar 10K

Reviews:

Related manuals for Scalar 10K

Brands by name

Popular brands

Quantum Scalar 10K, User Manual

Search results

Summary of Contents for Scalar 10K

Reviews:

Related manuals for Scalar 10K

Brands by name

Popular brands