Quantum Scalar 10K, User Manual, Page: 69 / 324

Using the Remote Management Unit 3-13
September 2007
Step 6 Enter the IP address, subnet mask, and gateway IP
address using the
Up , Down , and Next buttons.
Step 7 Select Y to accept the changes.
Accessing and Logging Into the RMU
Before you begin using the RMU, make certain you have
configured your RMU with the correct network address.
Step 1 Open a Web browser.
Step 2 Point your browser to the RMU IP address,
excluding any leading zeros. For example, if your IP
address is 182.073.056.205 on the library operator
panel LCD, go to the following address:
http://182.73.56.205.
The RMU user interface displays. Some of the features of
the RMU require you to log in. Continue with Step 3 to
log into the RMU.
Step 3 Log into the RMU when prompted. Enter your user
name into the
User Name field and password into
the Password field. The user name and password
are case sensitive.
Note
For information
on determining
or setting your
RMU IP address,
see
Setting up the
RMU on page
4-12.
Note
The default user
login and
password are
admin and secure ,
respectively.