Quantum Scalar 10K, User Manual, Page: 172 / 324

4-94 Menus and Commands
6-00058-05 Rev A
Logical Serial Number
Path: Main Menu Setup Drives Logical SN
Use the Logical SN Dialog to enable or disable the assignment
of a logical serial number to a drive that will always be the
same for that drive position in the library.
The logical serial number is the last 9 digits of the world wide
name assigned to the drive slot, preceded by the character
“F”.
LTO-1, LTO-2, LTO-3, and LTO-4 drives support logical serial
numbers.
Figure 4-132 Logical Serial Number Dialog
Parameters Description
Logical SN Y to assign a logical serial
number.
N to disable the logical serial
number assignment.
Cleaning Submenu
Path: Main Menu Setup Cleaning
Use the Cleaning Submenu to select how and when you want
to clean your drive. See Figure 4-133.
Figure 4-133 Cleaning Submenu
Depending on your selection, refer to:
• Drives Dialog on page 4-96
• Media Dialog on page 4-97
Note
When enabling or disabling the
logical serial number, the library
must be power cycled before the
change is reflected in the library.
Logical SN: Y<
.
Accept: N
Note
When enabled, the logical serial
number replaces the
manufacturer’s serial number.
> Drives
...
Media
...
View
...