![background image](http://html1.mh-extra.com/html/quantum/scalar-10k/scalar-10k_user-manual_3588683221.webp)
Service Menu
4-143
September 2007
Figure 4-218
Wrong Tower Mode
DI/DO Submenu
Path:
Main Menu
Service
Diags
DI/DO
Use the DI/DO to run loopback tests, or sensor or lock tests.
See Figure 4-219.
Figure 4-219
DI/DO Submenu
Depending on your selection, refer to:
•
Loopback Dialog
below
•
Sensors Submenu
on page 4-145
•
Locks Dialog
on page 4-150
Loopback Dialog
Path:
Main Menu
Service
Diags
DI/DO
Loopback
Use the Loopback Dialog to send test signals from the main
control card to other system cards and return.
See Figure 4-220.
Figure 4-220
Loopback Dialog
WRONG TOWER MODE
Set mode for TCL (01)
to SERVICE.
Accept: N <
Note
Use these tests to
isolate problems
in the system.
>
Loopback
...
Sensors
Locks
...
Device:LMC
Number:01
Results:
Accept: N
Summary of Contents for Scalar 10K
