![background image](http://html1.mh-extra.com/html/quantum/scalar-10k/scalar-10k_user-manual_3588683301.webp)
Service Action Codes
6-27
September 2007
80 00 00
Failures detected in the X-axis servo system.
Action 1
Contact GCH. For GCH contact information, refer to
Getting More Information
or Help
on page 1-8.
81 00 00
Failures detected in the Y-axis servo system.
Action 1
Contact GCH. For GCH contact information, refer to
Getting More Information
or Help
on page 1-8.
82 00 00
An unexpected Motor Control condition was received.
Action 1
Contact GCH. For GCH contact information, refer to
Getting More Information
or Help
on page 1-8.
83 00 00
The Locate Fiducial Command failed with no target found. This failure
happens most likely during an initial installation of the Library
Subsystem.
Action 1
Run Teach New from the operator panel (
Main Menu
Service
Teach
Teach New
).
Action 2
If the problem is not corrected or persists, contact GCH. For GCH contact
information, refer to
Getting More Information or Help
on page 1-8.
84 00 00
Y-axis failed to reach target.
Action 1
Contact GCH. For GCH contact information, refer to
Getting More Information
or Help
on page 1-8.
85 00 00
X-axis failed to reach target.
Action 1
Contact GCH. For GCH contact information, refer to
Getting More Information
or Help
on page 1-8.
Table 6-2
Service Action Codes (Continued)
Reported
SAC
Perform these actions
Summary of Contents for Scalar 10K
