background image

Chapter 6: DXi4000 Replication

Performing Data Replication

Quantum DXi4000 User’s Guide

87

Task Overview: 

Recovering a Replicated 

Share

If a NAS share is lost or damaged on the source system, you can recover 

it on the target system using a received snapshot. When you recover a 

share, it is recreated on the target system just as it was at the point in 

time when the snapshot was saved.
To recover a replicated share:

1

On the target system, select a received snapshot and perform a 

recover operation (see 

Recovering a Share

 on page 99).

The share is now available on the target system.

2

(Optional) Map your backup application to the recovered share on 

the target system to continue making backups.

3

When the source system is operating correctly again, choose one of 

the following actions:

• Failback the share to restore it on the original source system (see 

Task Overview: Performing a Share Failback

 on page 87). Then, if 

necessary, map your backup application to the restored share 

on the original source system.

• Continue to make backups to the recovered share on the 

original target system. In addition, set up replication to replicate 

the share back to the original source system (see 

Task Overview: 

Setting Up and Performing Replication

 on page 85). In this 

scenario, the original source system is now the target, and the 

original target system is now the source.

Task Overview: 

Performing a Share 

Failback

If a NAS share is lost or damaged on the source system, you can failback 

the share to the source system using a received snapshot on the target 

system. When you failback a share, it is restored on the source system 

just as it was at the point in time when the snapshot was saved.
To perform a share failback:

1

On the original source system, add the original target system to the 

list of allowed replication sources (see 

Replication Receive

 on 

page 157).

Note:

For the purposes of failback, the original source system is 

now acting as a target because it will receive the snapshot 

from the original target system.

Summary of Contents for DXi4510





































































































































































































































































































Reviews: