Quantum DXi4510, User Manual

Page: 81 / 292

Chapter 4: DXi4000 Configuration Wizards
Replication Wizard
Quantum DXi4000 User’s Guide 57
Figure 29 Replication Wizard:
About
Step 2: System
1 If data on this DXi4000 will be replicated to another DXi system,
enter the following information under Target DXi (see Figure 30 ):
a In the Target Hostname or IP Address box, enter the hostname
or IP address of the system that will receive the replicated data.
Note:
When entering IP addresses, never use an address that
is in a reserved IP address range. To see a list of
reserved IP address ranges, click the quick tip icon
[?]
located near the IP address field.
Note: To use hostname format, you must specify at least one
DNS IP address on the Network page (see Network on
page 176).
b (Optional) Clear the Encrypt data before replication check box
to disable encryption when sending the snapshot to the
destination.
Note: Encryption is enabled by default. However, for best
performance, if your data network is already secured,
you should clear the Encrypt data before replication
check box.