![background image](http://html2.mh-extra.com/html/quantum/dxi4510/dxi4510_user-manual_3732247181.webp)
Chapter 9: DXi4000 Configuration
Replication
Quantum DXi4000 User’s Guide
157
Note:
Encryption is enabled by default. However, for best
performance, if your data network is already secured, you
should clear the
Use Encryption
check box.
4
Click
Apply
.
5
If necessary, click
Resume
to resume the replication service.
Replication Receive
The
Replication Receive
page allows you to specify the source systems
the DXi4000 will receive replicated data from. You must add a source
system to the list of allowed replication sources before you configure
the source to send replicated data to the DXi4000. The DXi4000 can
receive replicated data from up to 10 sources. You can also specify the
number of received snapshots that are retained for each source.
Note:
For more information about working with received snapshots,
To access the
Replication Receive
page, on the
Replication
Configuration
page, click the
Receive
).
Figure 89 Replication Receive
Page
Use the
Replication Receive
page to perform the following tasks:
Summary of Contents for DXi4510
