Quantum DXi4510, User Manual

Page: 135 / 292

Chapter 6: DXi4000 Replication
Actions
Quantum DXi4000 User’s Guide 111
• Click Resume to resume all incoming and outgoing replication and
failback traffic.
If a replication job was in progress when replication was paused,
the replication job continues.
Replication State
The replication state applies to all NAS shares on the DXi4000 that are
eligible for replication (that is, all deduplicated shares).
• Click Enable to enable replication for all shares.
• Click Disable to disable replication for all shares.
If a replication job is currently in progress, the system continues
until the entire replication job is complete. After the replication job
has completed, the system disables replication. The system will not
be able to replicate data for any shares until you click Enable .
Note: To disable replication for a single share, select it on the
Replication > Send page and click Edit . Clear the Enable
replication and the Enable scheduled replication check
boxes, and then click Apply . For more information, see
Send NAS on page 88.
Replication
Performance
The DXi4000 maintains cumulative performance statistics for send and
receive replication activity. The statistics appear on the
Home
page and
elsewhere. To reset these statistics so the system will calculate them
with new data going forward, click
Clear
.
• Click
Clear Send
to reset cumulative performance statistics
gathered while replicating shares to target systems, or when
sending a snapshot during a failback operation.
• Click
Clear Receive
to reset cumulative performance statistics
gathered while receiving replicated shares from source systems, or
when receiving a snapshot during a failback operation.