Quantum DXi4510, User Manual

Page: 218 / 292

Chapter 9: DXi4000 Configuration
System
194 Quantum DXi4000 User’s Guide
• Confirm New Password - Enter the new password again to
confirm it.
Note: The default password is password .
Note: Passwords are limited to 15 characters. All alphanumeric
characters are allowed, as well as underscores ( _ ) and
hyphens ( - ).
2 Click Apply .
Enabling CLI Accounts
The CLI accounts provide access to the DXi4000 command line interface
as an administrator or monitor.
Note: For more information about using the CLI, see the
DXi4000
Command Line Interface (CLI) Guide
.
To enable or disable the CLI accounts:
1 Under CLI Administrator Login Settings or under CLI Monitor
Login Settings , do one of the following steps:
• Select the Enable CLI Login check box to enable the CLI
account.
• Clear the Enable CLI Login check box to disable the CLI
account.
2 Click Apply .
Changing CLI Passwords
Use the CLI passwords when logging onto the command line interface
as an administrator or monitor.
To change the CLI passwords:
1 Under CLI Administrator Login Settings or under CLI Monitor
Login Settings , select the Change password option.
2 Enter the following information:
• Old Password - Enter the old password.
• New Password - Enter the new password.