Quantum DXi4510 User Manual Download Page 141

Page: 141 / 292

Chapter 7: DXi4000 Status

Hardware

Quantum DXi4000 User’s Guide

117

Figure 64 Network Ports Page

The

Network Ports

page displays the following information:

•

Component

- The number of Ethernet port.

•

Value

- The speed of the port in Mb/s.

•

Status

- The status of the Ethernet port.

•

- (Green) The port is connected.

•

Down

- (Green) The port is not connected.

Storage Arrays

The

Storage Arrays

page allows you to view information about storage

arrays and controllers in the DXi4000.
To access the

Storage Arrays

page, on the

Details

page, click the

Storage Arrays

tab (see

Figure 65

Summary of Contents for DXi4510





































































































































































































































































































Search results

Summary of Contents for DXi4510

Reviews:

Related manuals for DXi4510

Brands by name

Popular brands

Quantum DXi4510, User Manual

Search results

Summary of Contents for DXi4510

Reviews:

Related manuals for DXi4510

Brands by name

Popular brands