Quantronix CubiScan 110-T, Operation And Technical Manual

Page: 75 / 92

Communications Protocol CubiScan 110-T Command Set
CubiScan 110-T 67
Comma (,)
Scale Cap Eng (050) or (100
Comma
(,)
Firmware
(0.000)‐(9.999)
Growth <SP> x 28
End Bytes <ETX><CR><
LF> End Bytes <ETX><CR><LF> End Bytes <ETX><CR><LF>
Length
5
Length
156
Length
6
Weight Units:
Causes the instrument to change the current weight units to either pounds or
kilograms.
Command
Description Command
Packet Acknowledge
Description Acknowledge
Packet Nack
Description Neg. Ack.
Packet
Start Byte <STX> Start Byte <STX> Start Byte <STX>
Command (#) Command (#) Command (#)
English or
Metric (E) or (M) Ack (A) Nack (N)
End Bytes <ETX><CR><LF> End Bytes <ETX><CR><LF> End Bytes <ETX><CR><LF>
Length
6
Length
6
Length
6
Write Value:
Write a specific parameter value to the instrument.
Command
Description Command
Packet Acknowledge
Description Acknowledge
Packet Nack
Description Neg. Ack.
Packet
Start Byte <STX> Start Byte <STX> Start Byte <STX>
Command (W) Command (W) Command (W)
Value
Number (0000)‐(9999) Ack (A) Nack (N)
Comma (,)
Value Data See Value Table
End Bytes <ETX><CR><LF> End Bytes <ETX><CR><LF> End Bytes <ETX><CR><LF>
Length 10+ Length 6 Length 6
Zero:
Causes the instrument to zero.
Command
Description Command
Packet Acknowledge
Description Acknowledge
Packet Nack
Description Neg. Ack.
Packet
Start Byte <STX> Start Byte <STX> Start Byte <STX>
Command
(Z)
Command
(Z)
Command
(Z)
Ack
(A)
Nack
(N)
End Bytes <ETX><CR><LF> End Bytes <ETX><CR><LF> End Bytes <ETX><CR><LF>