Quantronix CubiScan 110-T Operation And Technical Manual Download Page 2

Page: 2 / 92

CubiScan 110-T Operations and Technical Manual

CubiScan

and the Quantronix logo are registered trademarks of Quantronix, Inc.

Scanning New Dimensions™, Qbit™, QbitWIN™, and The FreightWeigh System™ are trademarks of Quantronix, Inc.

Windows

is a registered trademark of Microsoft Corporation.

CubiScan

software and firmware are protected by international and domestic copyrights.

CubiScan

150 measurement products are protected by one or more of U.S. Patents Re42,430 and D490,328 and

foreign patents.

CubiScan

110 measurement products are protected by one or more of U.S. Patent Re42,430 and foreign patents.

CubiScan

125 measurement products are the subject of U.S. Patent 8,928,896. Another U.S. patent is pending.

CubiScan

225 measurement products are the subject of a pending U.S. patent application.

This document and website Copyright

The CubiScan 110-T is to be used to determine freight charges of rigid, non-sound-absorbing, cuboidal objects only.

Dimensions shown on the display are of the smallest cuboidal shape in which the object may be enclosed.

The CubiScan 110-T should only be serviced by qualified personnel.

Observe precautions for handling electrostatic sensitive devices when setting up
or operating the CubiScan 110-T.

Disconnect all power to the CubiScan 110-T before servicing or making any
connections.

CAUTION

WARNING

Summary of Contents for CubiScan 110-T





























































































Search results

Summary of Contents for CubiScan 110-T

Reviews:

Brands by name

Popular brands

Quantronix CubiScan 110-T, Operation And Technical Manual

Search results

Summary of Contents for CubiScan 110-T

Reviews:

Brands by name

Popular brands