Quantronix CubiScan 110-T, Operation And Technical Manual

Page: 71 / 92

Communications Protocol CubiScan 110-T Command Set
CubiScan 110-T 63
Length 15+ Length 6 Length 6
Stream Begin:
This command is executed first. It initializes a streaming file transfer.
Command
Description Command
Packet Acknowledge
Description Acknowledge
Packet Nack
Description Neg. Ack.
Packet
Start Byte <STX> Start Byte <STX> Start Byte <STX>
Command (p) Command (p) Command (p)
Stream (S) Ack (A) Nack (N)
File Name See Put File Table
Comma (,)
File Size
(0000000000)‐(99
99999999)
End Bytes <ETX><CR><LF> End Bytes <ETX><CR><LF> End Bytes <ETX><CR><LF>
Length 27+ Length 6 Length 6
Stream Data:
This command is executed second. It streams the file data.
Command
Description Command
Packet Acknowledge
Description Acknowledge
Packet Nack
Description Neg. Ack.
Packet
Start Byte <STX> Start Byte <STX> Start Byte <STX>
Command (p) Command (p) Command (p)
Stream (D) Ack (A) Nack (N)
File Data Binary Data
End Bytes
<ETX><CR><LF>
End Bytes
<ETX><CR><LF>
End Bytes
<ETX><CR><LF>
Length
6+
Length
6
Length
6
Put file table:
Cs1x0.bin – Sends a firmware file.
Cs1x0par.txt – Sends a parameter file.
Measure:
Causes the instrument to initiate and communicate a measurement. This is a
non‐legal for trade mode.
Command
Description Command
Packet Acknowledge
Description Acknowledge Packet Nack
Description Neg. Ack.
Packet
Start Byte
<STX>
Start Byte
<STX>
Start Byte
<STX>
Command
(M) or (C)
Command
(M)
Command
(M)
Ack
(A)
Nack
(N)
CubiScan OR
Host (C) or (H) CubiScan or
Host (C) or (H)
Location ID (000000) – (ZZZZZZ) Measure or
Zero (M) or (Z)
Comma (,)
Length (L000.0) – (L999.9)
Comma
(,)
Width
(W000.0) – (W999.9)
Comma (,)
Height (H000.0) – (H999.9)