Setup
Setup Checklist
CubiScan 110-T
16
•
Is the CubiScan free moving? The CubiScan should not be pushed up
against a wall and no object, cable, etc., should be resting on it or against
it.
•
Has the AC power adapter been connected correctly?
•
Has the CubiScan 110-T been set up to communicate with a computer (if
applicable)?
•
(Optional) Has the barcode scanner been connected properly?
•
If you are using Qbit to operate the CubiScan 110-T, has the application
been copied onto your computer’s hard-disk drive? (Refer to the
Qbit
User Guide
for information.)
•
Does the CubiScan require recalibration? The CubiScan 110-T was
calibrated at the factory, but
may
require recalibration due to handling
during shipping. Refer to
for information on calibrating the
CubiScan 110-T. If you are using Qbit software, check the status of the
CubiScan before operating it. Refer to the
Qbit User Guide
for
information on checking the CubiScan’s status.
