UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 313/1523
6.7.2.4
username snmpv3 encryption
This command specifies the encryption protocol and key to be used for the specified login user. The
valid encryption protocols are
none
or
des
. The
des
protocol requires a
key
, which can be specified on
the command line. The
key
may be up to 16 characters. If the
des
protocol is specified but a key is not
provided, the user will be prompted to enter the key. If
none
is specified, a key must not be provided.
The <username> is the login user name for which the specified encryption protocol will be used.
Syntax
username snmpv3 encryption <username> {none | des [<key>]}
no username snmpv3 encryption <username>
<username> -
is the login user name.
des -
des encryption protocol.
none -
no encryption protocol.
<key> -
A key 128 alphanumeric characters in length.
no -
This command sets the encryption protocol to
none
. The <username> is the login user name for
which the specified encryption protocol will be used.
Default Setting
No encryption
Command Mode
Global Config
