UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 60/1523
6.2.1.2
show interface counters
This command displays a summary of statistics for a specific interface or all interfaces.
Syntax
show interface counters [{<slot/port> | [port-channel <portchannel-id>]}]
<slot/port> -
is the desired interface number.
<portchannel-id
>
-
is the desired port-channel interface number. The range of the port-channel ID is
1 to 64.
no paramter -
Displays statistics information for all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
The display parameters when the argument is '<slot/port>' or port-channel are as follows:
Packets Received Without Error:
The total number of packets (including broadcast packets and
multicast packets) received by the processor.
Packets Received With Error:
The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol.
Broadcast Packets Received:
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast packets.
Packets Transmitted Without Error:
The total number of packets transmitted out of the interface.
Transmit Packets Errors:
The number of outbound packets that could not be transmitted because
of errors.
Collisions Frames:
The best estimate of the total number of collisions on this Ethernet segment.
Time Since Counters Last Cleared:
The elapsed time, in days, hours, minutes, and seconds since
the statistics for this port were last cleared.
The display parameters if no argument is used are as follows:
Interface:
The physical slot and physical port or the logical slot and logical port.
Packets Received Without Error:
The total number of packets (including broadcast packets and
multicast packets) received.
