UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 529/1523
6.16.17.2.3
boot-system host autosave
Use this command to automatically save the downloaded configuration file to the startup-config file on
the switch. When autosave is disabled, you must explicitly save the downloaded configuration to
non-volatile memory. If the switch reboots and the downloaded configuration has not been saved, the
AutoInstall process begins, if the feature is enabled.
Syntax
boot-system host autosave
no boot-system host autosave
no -
Use this command to disable automatically saving the downloaded configuration on the
switch.
Default Setting
None
Command Mode
Privileged Exec
Display Message
None
6.16.17.2.4
boot-system host autoreboot
Use this command to allow the switch to automatically reboot after successfully downloading an image.
When auto reboot is enabled, no administrative action is required to activate the image and reload the
switch.
This command only work on the autoupgrade is enable.
Syntax
boot-system host autoreboot
no boot-system host autoreboot
no -
Use this command to prevent the switch from automatically rebooting after the image is
downloaded by using the AutoInstall feature.
Default Setting
None
Command Mode
Privileged Exec
Display Message
None
