UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 958/1523
10.4.7
congestion-notify CPID
The user can go to the CLI Global Configuration Mode to configure the device identifier of CPID. Use the
‘congestion-notify CPID devid <value>’ global configuration command. Use the ‘no congestion-notify
CPID devid
’ to configure device identifier to default value.
Syntax
congestion-notify CPID devid <
0-16777215 >
no congestion-notify CPID devid
<0-16777215> -
This command sets the Device ID of CPID
no -
This command configure device identifier to default value.
Default Setting
0
Command Mode
Global Data-Center-Bridging Mode
The user can go to the CLI Global Configuration Mode to configure the LSB field of CPID of CNM
payload. Use the ‘congestion-notify CPID LSB Q_No’ global configuration command to set the CPID
mode to use queue number of sampled packet. Use the ‘congestion-notify LSB CPIndex’ to configure
device identifier to use congestion point index.
Syntax
congestion-notify CPID LSB { CPIndex | Q_No}
CPIndex -
This command configures queue number of sampled packet.
Q_No -
This command sets congestion point index.
Default Setting
Q_No
Command Mode
Global Data-Center-Bridging Mode
