![Quanta Computer T1048-LB9 Use Manual Download Page 464](http://html1.mh-extra.com/html/quanta-computer/t1048-lb9/t1048-lb9_use-manual_770078464.webp)
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 464/1523
Chassis ID:
Identifies the chassis of the local device.
Port ID Subtype:
Identifies the type of port on the local device.
Port ID:
Shows the port number that transmitted the LLDPDU.
System Name:
Shows the system name of the local device.
System Description:
Describes the local system by identifying the system name and versions of
hardware, operating system, and networking software supported in the device.
Port Description:
Describes the port in an alpha-numeric format.
System Capabilities Supported:
Indicates the primary function(s) of the device.
System Capabilities Enabled:
Shows which of the supported system capabilities are enabled.
Management Address:
Lists the type of address and the specific address the local LLDP agent
uses to send and receive information.
MAC/PHY Configuration/Status
Auto-Negetitation:
Identifies the auto-negotiation support and current status of the local device.
PMD Auto-Negetitation:
The duplex and bit-rate capability of the port of the local device.
Operational MAU Type:
Displays the MAU type. The MAU performs physical layer functions,
including digital data conversion from the Ethernet interfaces’ collision detection and bit injection
into the network.
Power Via MDI
MDI Power Support:
The MDI power capabilities and status.
PSE Power Pair:
Indicates the way of feeding the voltage to the data cable.
Power Class:
PoE power class.
Link Aggregation
Aggregation Status:
Indicates the link aggregation capabilities and the current aggregation
status.
Aggregation Port Id:
Aggregated port identifier.
Maximum Frame Size:
Shows the maximum frame size capability of the implemented MAC and
PHY of the remote device.
Port VLAN Identity:
Shows the PVID of the connected port of the local device.
VLAN Name:
Shows the name of the VLAN which the connected port is in.
Protocol Identity:
Shows the particular protocols that are accessible through the port of the local
device.