UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 597/1523
6.20.3.12
ipv6 next-hop
Policy Based Routing (PBR) is an alternative to routing protocols and allows you to configure a policy for
unicast traffic flows, which provides more control over routing than a routing protocols does and avoids
the need to configure interface-level traffic classification.
PBR applies a route policy to all ingress unicast traffic received on a PBR-enabled interface. PBR cannot
be applied to egress traffic or to multicast traffic.
If the ingress unicast traffic does not match any route policy statements, the route policy applies all the
configured set clauses. Routing protocols forward traffic that does not match any route-policy permit
statement.
Use this command to configure where to route the IPv6 unicast packets.
Syntax
Ipv6 next-hop <link-local-address> interface {<slot/port> | vlan <vlan-id>}
<link-local-address>
- Set next hop to which to route the packets.
Command Mode
Policy-Class-Map Config
