UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 183/1523
6.2.13.2
port-monitor session
This command configures a probe port and a monitored port for monitor session (port monitoring). Use
the source interface <slot/port> parameter to specify the interface to monitor. Use rx to monitor only
ingress packets, or use tx to monitor only egress packets. If you do not specify an {rx | tx} option, the
destination port monitors both ingress and egress packets. Use the destination interface <slot/port> to
specify the interface to receive the monitored traffic.
Syntax
port-monitor session <session-id> {source interface {<slot/port> | port-channel <portchannel-id>} [{rx |
tx}] | destination interface <slot/port> }
no port-monitor session <session-id> { source interface {<slot/port> | port-channel <portchannel-id>} |
destination interface <slot/port>}
<slot/port> -
Interface number.
<portchannel-id>
- Port-channel interface number. The range of port-channel ID is 1 to 64.
tx/rx
–
Use to monitor ingress packets or egress packets.
no -
This command removes the probe port or the mirrored port from a monitor session (port
monitoring).
Default Setting
None
Command Mode
Global Config
This command removes all configured probe ports and mirrored port.
Syntax
no port-monitor
Default Setting
None
Command Mode
Global Config
