UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 827/1523
8.5.2.6
ip pim spt-threshold
Use this command to configure the Data Threshold rate for the last-hop router to switch to the shortest
path. The possible values are 0 or Infinity.
Syntax
ip pim spt-threshold {0 | Infinity}
no ip pim spt-threshold
no -
This command is used to set the Data Threshold rate for the RP router to the default value.
Default Setting
0
Command Mode
Global Config
i
This command takes effect only when PIM-SM is configured as the PIM mode
8.5.2.7
ip pim ssm
Use this command to define the Source Specific Multicast (SSM) range of IP multicast addresses.
Syntax
ip pim ssm {default | <group-address> <group-mask>}
no ip pim ssm {default | <group-address> <group-mask>}
<group-address>
-
Specifies the group address.
<group-mask> -
Specifies the group-mask.
no -
This command is used to disable the specified Source Specific Multicast (SSM) range.
Default Setting
Disabled
Command Mode
Global Config
Parameters
default
- Defines the SSM range access list to 232/8.
