QMS Magicolor 6100, Operation Manual

Page: 140 / 224

& .
+
)
If you have problems with double feeding, remove the media from the cassette
and fan the sheets. They may be sticking together.
» Note: Do not fan transparencies since this causes static.
Remove transparencies from the output tray immediately to avoid static buildup.
Do not allow the output tray to overfill.
» Note: The face-down output tray has a 250-sheet capacity. Jamming may occur if
you allow media to accumulate more than 250 sheets at a time.
Store media in a dry location away from moisture and humidity.
Make sure you’ve loaded the media printing-side up. Many manufacturers place
an arrow on the end of the wrapper to indicate the printing side. If you can’t deter-
mine which side of the media to print on, remove the media from the cassette,
rotate the stack a half-turn, turn the stack over, and then place it back in the
cassette.
Ensure that you have the correct media type selected if you’re printing on enve-
lopes, glossy stock, labels, thick stock, transfer media, or transparencies.
Ensure that the printer is on a hard, flat, level surface.
Ensure that the cassette only contains one type of media at a time.