QMS Magicolor 6100, Operation Manual

Page: 79 / 224

**E%
+!
& ( " '
** +!
**** +!
% +!
Use this procedure when you are sure the job has finished being sent from the host
and the message window displays
WAITING ON INPUT
END JOB?
» Note: This procedure does not end print jobs that are still receiving data. Its only
purpose is to provide an end-of-job indicator for a print job that does not have one.
You can identify an end-of-job indicator in the Administration/Communications/Parallel
and Administration/Communications/Serial menu. (Refer to chapter 3, “Technical
Press this key... to... The message window
reads...
Cancel Access the Job Cancel menu.
JOB CANCEL
CANCEL JOB
Cancel or Select Cancel the oldest job in the queue.
CANCEL JOB
IS SELECTED
Press this key... to... The message window
reads...
Cancel
Access the Job Cancel menu.
JOB CANCEL
CANCEL JOB
Next (twice)
Advances to the Cancel All Jobs
mode.
JOB CANCEL
CANCEL ALL JOBS
Cancel or
Select
Cancel all jobs with a printing,
interpreting, spooled, or terminating
status. The
CANCEL ALL JOBS
message displays until all print jobs
are completely removed.
CANCEL ALL JOBS
IS SELECTED