QMS Magicolor 6100, Operation Manual

Page: 51 / 224

*
%& $$
Do not leave the printer open for any length of time, especially in well-lit places;
light may damage the OPC belt cartridge.
Do not open the printer during printing and do not tap paper stacks on the printer.
Do not tilt, lubricate, or disassemble the printer.
Do not touch the electrical contacts, gears, or laser beam devices. Doing so may
damage the printer and cause the print quality to deteriorate.
Keep media in the output tray at minimum level. If the media stacks too high, your
printer may experience media jams and excessive media curl.
Lift the printer from the bottom only, using the carrying grips under each side cor-
ner. Make sure two people are available to lift the printer when moving it. When
moving the printer, keep the printer level to avoid spillage of fuser oil. See chapter
6, “Repacking the Printer,” for printer shipping instructions.
Keep the following in mind when storing the printer for an extended period:
—Unplug the printer.
—Remove the toner and OPC belt cartridges from inside the printer. After remov-
ing the cartridges, return them to their original packaging. If the original pack-
aging is not available, protect the toner cartridges from spilling toner, and
protect the OPC belt cartridge from damage and light.
—See appendix B, “Technical Specifications,” in the
Reference
manual for stor-
age specifications. See chapter 6, “Repacking the Printer,” for printer shipping
instructions.
*
Paper dust may accumulate inside the printer. Blurred or splotchy prints and paper
jams can result from dusty printer parts. Regular cleaning takes only a few minutes