QMS Magicolor 6100, Operation Manual

Page: 159 / 224

"&
.
+"!*
$'
OUTPUT BIN FULL
The media has exceeded the
limit (such as over 250 sheets
of 20 lb [75 g/m²] bond) in the
output bin. Remove the media
from the output bin.
OUTPUT BIN JAM
A media jam has been
detected between the fuser
and output tray rollers located
near the top cover. Locate and remove
the jam.
PRINTING STATUS
A status page is printing Wait until after the
status page prints, and
the message clears.
PUT SIZE PAPER IN ANY BIN
Operator Control/Chain
Inputbins is set to On and a
chained cassette is empty. Refill the cassette with
the specified size
media.
PUT SIZE PAPER IN
INPUTBIN BIN
The Operator Control/Chain
Inputbins is set to Off and the
displayed cassette is empty.
Refill it with the specified size
media.
SIZE
is the media
size detected by the engine,
and
INPUTBIN
is the empty
cassette.
Refill the cassette with
the specified size
media.
PUT THICK STOCK IN UPPER
BIN
Thick stock has been
specified in the Operator
Control/Media/For Upper Bin
control panel setting.
Refill the cassette with
thick stock or change
the control panel
setting from Thick
Stock to Automatic.
REAR DOOR OPEN
The rear cover over the
transfer unit is not closed. Close the rear cover.
REPLACE BELT
The OPC belt cartridge need
replacing. Install a new belt
cartridge.
This status message... means... Do this...