QMS Magicolor 6100 Operation Manual Download Page 161

Page: 161 / 224

+"!*

WARMING UP

The printer is warming up.

Wait. No other action
needed.

x ACTIVE JOBS

The printer is on line. (

identifies the number of jobs
in process.)

No action needed.

x TONER EMPTY

The

(color) toner cartridge

is empty.

Replace the toner
cartridge.

x TONER LOW

The

(color) toner is low.

There is enough toner left to
print approximately 100
pages before the printer
stops.

Redistribute the toner
in the cartridge, or
replace the cartridge.

x TONER MISINSTALLED

The

(color) toner cartridge

is not installed properly.

Remove the toner
cartridge and reinstall.

This status message...

means...

Do this...

Summary of Contents for Magicolor 6100

































































































































































































































Search results

Summary of Contents for Magicolor 6100

Reviews:

Related manuals for Magicolor 6100

Brands by name

Popular brands

QMS Magicolor 6100, Operation Manual

Search results

Summary of Contents for Magicolor 6100

Reviews:

Related manuals for Magicolor 6100

Brands by name

Popular brands