QMS Magicolor 6100, Operation Manual

Page: 125 / 224

2&
* )'
4/ */*.
If you want to utilize the magicolor 6100’s built-in ICC color matching, be sure that
this is turned on. By default this setting is already on. Listed below are the user-
selectable settings when you click on the Configure button next to Use Internal ICC
Color Matching.
,6"
The choices for RGB Source are sRGB, Trinitron G1.8D50, Apple RGB, Prepress,
Printer Default, Colorific: PnP VESA DDC-Plug and Play Monitor and None.
When Internal ICC Color Matching is selected, the RGB Source has to be set from
the above list or you have the option of creating your own custom RGB Source
profile with the Colorific software that was included with your
magicolor
6100. See
the Colorific read me file located on the
QMS Software Utilities
CD-ROM for more
details on how to create and load a custom RGB Source profile.
» Note: The default setting for RGB Source is set to sRGB.
"*
The printer-resident simulations are Commercial, Eurocolor, or SWOP. When
Internal ICC Color Matching is selected, the Simulation can be set from the above
list to allow the
magicolor 6100 to simulate another color output device's color
space, such as SWOP or Eurocolor, or you have the option of creating your own
custom RGB Source profile with the Colorific software. CMYK Display and Inkjet
Proofer are not shipped pre-installed, but are available on your
QMS Software
Utilities CD-ROM.
These can be found at:
PC and UNIX systems—Platform/Windows/Color/MC6100/ICCProfs/
Simulate
Macintosh (viewable only from a Macintosh) system—Color/MC6100/
ICCProfs/Simulate
CMYK Proofer and Inkjet Proofer may be downloaded according to the instruc-
tions contained in the read me file located in the same CD-ROM directory, and
accessed via the standard QMS drivers.
The host profiles, for use with host-based color matching, are now located at:
PC and UNIX systems—Platform/Windows/Color/MC6100/ICCProfs/Host